1) What is a computer?
Computer is a programmable machine. It the integral part of
everyday life.
2) What are the different functions of a computer?
A computer does the following functions;
a) Accepting data
b) Processing Data
c) Storing Data
d) Displaying Data
3) Draw the hierarchical classification of the computer.
4) How a minicomputer different from a mainframe?
Minicomputer is a midsized multiprocessing and multi user computer. It
is also called mid-range server. But mainframes are huge computers, most
commonly occupying entire rooms or floor. It is highly costly.
5) What is Super computer?
The fastest type of computer. Supercomputers are very expensive and are employed for
specialized applications that require immense amounts of mathematical
calculations. For example, weather forecasting requires a supercomputer. Other
uses of supercomputers include animated graphics, fluid dynamic calculations, nuclear energy research, and petroleum
exploration.
6) Differentiate Input and Output device.
Input devices are used for giving input to the computer. But output
devices are used to get the result back from the computer. The examples of
input devices are keyboard, mouse, scanner, digital camera atc...whereas output
devices include monitor, printer, projector etc....
7) What is a storage device? What is the common classification?
Storage devices are used to store data in the computer. The different
types of storage devices are;
a) Magnetic Devices.
b) Optical Devices.
c) Solid-State Storage Devices.
8) What do you mean by a processing device? What are the various types of
processing devices?
The main function of a computer is to process data. The various types of
processing device in a computer are;
a) Microprocessor
b) Chipset
c) BIOS
9) Differentiates Serial and Parallel port.
Serial port and parallel port are used for transferring data in/out of
the computer. In serial port transmission only 1 bit is transmitted at a time.
Most serial ports on personal computers conform to the RS-232C or RS-422
standards. A parallel interface for connecting an external device such as a
printer. On PCs, the parallel port uses a 25-pin connector (type DB-25) and is
used to connect printers, computers and other devices that need relatively high
bandwidth. It uses parallel transmission of data.
10) What is an
interface?
These are the communication channel that enables your computer to
exchange information with various devices.
11) What is a
microprocessor?
The most important electronic component on the computer. It is a
programmable logical device for processing data. In the world of personal computers, the terms MICROPROCESSOR and CPU are used interchangeably.
12) What are the
factors affecting the speed of the microprocessor?
The following are the factors affecting the speed of the microprocessor.
a) Number of instructions build in the processor.
b) Bandwidth
c) Clock Speed
d) Number of transistors inside the processor
13) What are the
differences between Multitasking and Multiprocessing?
Multitasking- Enables the processor to do multiple programs simultaneously by fast
switching through the programs. Here doesn't have the involvement of multiple
processors.
Multiprocessing- Enables the processor to do multiple programs simultaneously by the
use of multiple processors.
14) What the difference
between FSB and BSB?
Front Side Bus. Another name for the system bus. The Front Side Busconnects the CPU to main memory. A microprocessor bus that connects
the CPU to a Level 2 cache is called Back Side Bus. Typically, a
backside bus runs at a faster clock speed than the Front Side Bus.
15) What is packaging a
microprocessor? What are the different packaging available?
Packaging is the process of connecting a microprocessor with a computers
motherboard. The types of microprocessor packaging are;
a) PGA
b) SPGA
c) SECC
d) LGA
16) What is LGA ?
An LGA socket is the connection point for a central processing unit
(CPU) to fit into a motherboard. The LGA stands for Land Grid Array.
17) What is CISC and
RISC?
Reduced Instruction Set Computer (RISC) and Complex Instruction Set
Computer (CISC) are two philosophies by which computer chips are designed. RISC
became a popular technology buzzword in the 1990s, and many processors used in
the enterprise business segment were RISC-based.
18) What is Intel
Pentium?
The Intel Pentium is a series of microprocessors first developed by the
Intel Corporation. These types of processors have been found in many personal
computers since 1993.
19) Any
difference between Pentium III and IV.
There have been a number of Pentium processor lines starting with the
base Pentium in 1993.The of the recent Pentium entries are Pentium III and
Pentium 4.
a) In a Pentium III processor, the bus speed is
generally 133 MHz (although there were a few with 100 MHz). The lowest bus
speed on a Pentium IV is 400 MHz, and there are versions with much higher
speeds (topping at 1066 MHz for the "extreme edition").
b) The Pentium 4s are smaller than the Pentium IIIs
c) Pentium III processors had (for the most part) about 512 KB of cache. Pentium 4 processors, on the other hand, start at 512 KB.
20) What are the
differences between Intel Celeron and Pentium family of Processors?
Celeron
·
According to Build Gaming Computers, Celeron processors are the low-end
processor intended for standard home computer use. SciNet reports the best
Celeron processor has an L2 Cache of 128kb, a clock speed limit of about 2.0
GHz and runs at a core voltage of 1.75V. These are useful numbers for
comparison.
Pentium
·
The top Pentium processor is the Pentium 4 Prescott. CPU Scorecard
reports it has an L2 cache of 1MB (1024kb), a potential 3.0 GHz clock speed and
runs at about 1.4V. The lowest performing Pentium 4 processor, the Willamette,
has an L2 cache of 256kb, a potential 2.0 GHz clock speed and runs at about
1.7V.
21) What is Hyper
Threading? What is the use of it?
A thread of execution, or simply a "thread," is one series of
instructions sent to the CPU. Hyper-threading is a technology developed to help
make better use of spare processing cycles. Hyper-threaded processors have a
duplicate set of registers, small spaces of high-speed memory storage used to
hold the data that is currently needed to execute a thread. When a CPU core is
delayed, waiting for data to be retrieved from another place in memory, it can
use these duplicate registers to spend the spare computation cycles executing a
different thread. The second set of registers will be pre-loaded with the data
needed to execute the second thread, so the CPU core can begin work immediately
22) What is Intel Atom
processor?
The Intel Atom family of processors are extremely small central
processing units (CPU) found mostly in ultraportable devices, such as netbooks,
cell phones and tablet PCs, according to Intel. While small and light on energy
use, Atom processors can handle the most common tasks, such as email and
instant messaging.
23) What is Nehalem
Architecture?
Nehalem is Intel's new microprocessor architecture The Core i7 chips
were the first processors ever produced using an architecture called Nehalem.
24) Which is a
heavy-duty Microprocessor of Intel?
Intel Xeon.
25) Which is the
processor suitable from Intel family of processors for Server and Workstation?
Intel Xeon.
26) What is full name
of AMD?
Advanced Micro Devices.
27) What are the latest
Processor of Intel and AMD?
For intel it is Intel Core i7 and AMD Opteron 6200 Series processor.
28) Write socket LGA
775 is apt for which type of Intel Processors?
The top of the line for the LGA775 series CPU socket was the Core 2
processor series, with the Core 2 Duo E8600, Core 2 Extreme QX9770 and Core 2
Quad Q9650 being the three top performers
29) Socket 939 is
developed by AMD. It supports a maximum of how many bits of computing? What are
the the different processors of AMD is suitable for this socket?
AMD Athlon 64, AMD Athlon 64FX and AMD Athlon 64 X2.
30) Which type of socket
is needed to connect a dual core processor of Intel?
Socket LGA 775.
31) What is Heat Sink?
What is its use? If it is not in the system what will happen?
A heat sink is a component used to lower the temperature of a device.It
is most commonly there on the microprocessor. If it is not properly fixed the
system, the system will shutdown automatically to prevent further damage to the
processor.
32) A CPU fan
should be placed in system. Why?
To make the system cool and more functioning.
33) What is Upgrading a
microprocessor? Why we have to do it?
34) Upgrading a
microprocessor is just physically replacing a processor with a new one. Before
doing so we have to make sure that the processor we want to use for your
upgrade is physically compatible with the socket on your computer's
motherboard. We also have to make sure that the motherboard has the internal
logic to support the processor.
35) What are the causes
of overheating of microprocessor?
a) Processor fan may not be properly connected.
b) Heat sink may be not contacted with the processor.
c) Jumpers may be configured to over clock the CPU.
d) Voltage supply incompatible
36) No Display. What is
the problem?
a) CPU fan problem
b) Heat sink related issue
c) Power related issues
d) Improper Jumper settings
37) What is the use of
Conventional memory in the system?
The size of conventional memory is 640KB. It is also called DOS memory
or Base memory. This memory is used by some small programs like Word star,
Lotus etc…DOS cannot use more than 640KB.
38) What is main memory
in a computer?
The main memory in a computer is called Random Access Memory. It is also
known as RAM. This is the part of the computer that stores operating system
software, software applications and other information for the central
processing unit (CPU) to have fast and direct access when needed to perform
tasks.
39) What is Cache
memory? What is the advantage if a processor with more cache memory you are
using?
Cache memory is the memory area between RAM and Processor. If cache
memory increases the speed of the system will also improved.
40) What are the
different types of RAM?
SRAM, DRAM, VRAM, SGRAM, DDR-SDRAM etc….
41) Differentiate SRAM
and DRAM.
SRAM
Static RAM stores each bit of data on six metal oxide semiconductor
field effect transistors, or MOSFETs. SRAM is used in devices that require the
fastest possible data access without requiring a high capacity. Some examples
are CPU caches and buses, hard drive and router buffers and printers.
DRAM
Dynamic RAM stores data using a paired transistor and capacitor for each
bit of data. Capacitors constantly leak electricity, which requires the memory
controller to refresh the DRAM several times a second to maintain the data.
42) What are the
different DRAM types?
FPMDRAM, EDO DRAM, SDRAM, RDRAM, DDR-SDRAM
43) What is the
difference between DDR-I and DDR-II?
DDR2 is the successor to DDR RAM. DDR 2 incorporates several
technological upgrades to computer system memory, as well as an enhanced data
rate.DDR 2 is capable of achieving twice the data transfer rate of DDR-I memory
because of its higher clock speed. It operates at a lower voltage than DDR-I as
well: 1.8 volts instead of 2.5.
44) Which is the latest
DDR version? Which processor of Intel will support it?
The latest DDR version is DDR-III. Intel’s all latest processors such as
Core i3,i5 and i7 will support it.
45) What are VRAM and
SGRAM?
VRAM is Video Random Access Memory. Video adapter or video system uses
VRAM. VRAM is dual ported. It is costly. But SGRAM is not dual ported and not
costly. It is a less expensive approach to graphics functions. Most commonly
all low cost graphics cards are using it.
46) What is SODIMM
memory module?
Small outline dual in-line memory module (SODIMM or SO-DIMM) is a type
of random access memory (RAM). It is a smaller version of a dual in-line memory
module (DIMM).It is the type of the memory module can be used in laptop.
47) Which is the memory
packaging suitable for a sub-note book system?
Micro DIMM
48) What is ECC/EPP?
EPP/ECP (Enhanced Parallel Port/Enhanced Capability Port) is a standard
signaling method for bi-directional parallel communication between a computerand peripheral devices that offers the
potential for much higher rates of data transfer than the original parallel
signaling methods. EPP is for non-printer peripherals. ECP is for printers and
scanners. EPP/ECP is part of IEEEStandard 1284.
49) What is over
clocking?
Over clocking is the process of forcing a computer component to run at a
higher clock rate.
50) What is memory
bank?
Sets of physical memory modules is referred to as memory banks. A memory bank
serves as a repository for data, allowing data to be easily entered and
retrieved.
51) What we need to
consider before connecting a memory to the system?
a) Capacity of the RAM required
b) Check if installed memory is supported by motherboard and processor
c) Form factor of the RAM
d) Type of RAM needed
e) Warranty of the RAM
52) What is Upgrading
the memory?
Adding a memory module to the existing bank on the available slot or
replacing the previous one with the increased memory size is also called
upgrading memory. This will surely increase the performance of the computer.
53) What is BIOS beep
code? What it does mean?
BIOS beep codes are the signs of different issues of the computer. The
beep code may vary depends on the manufacture of BIOS. For example in case of
Award BIOS the beep code will be,
1 long beep- shows memory problem
1 long beep and 2 short beeps- failure of DRAM parity
1 log beep and 3 short beeps- signifies Video error
Continuous beep- signifies failure in memory or Video memory.
54) Write any 5 BIOS
codes and their indications?
AMERICAN MEGATRENDS (AMI) BEEP CHART
|
BEEPS
|
ERROR DESCRIPTION
|
|
1 Beep
|
Memory timing error
|
|
2 Beeps
|
Mismatched memory parity
|
|
3 Beeps
|
Memory malfunction
|
|
4 Beeps
|
Motherboard malfunction
|
|
5 Beeps
|
Bad CPU
|
|
6 Beeps
|
Keyboard controller error
|
|
7 Beeps
|
General exception error
|
|
8 Beeps
|
Video memory error
|
|
9 Beeps
|
Bad ROM checksum
|
|
10 Beeps
|
CMOS error
|
|
11 Beeps
|
Bad cache RAM
|
55) What is RDRAM?
56) What is SIMM? Is it
is using now?
Acronym for Single In line Memory Module,
a small circuit board that can hold a group of memory chips. Typically, SIMMs hold up to eight (on Macintoshes) or nine (on PCs) RAM chips. On
PCs, the ninth chip is often used for parity error checking. Unlike memory
chips, SIMMs are measured in bytes rather than bits.
Now a days this memory module is not used.
57) Why do we call
motherboard a motherboard?
Motherboard is the basic integrated board of the computer on which all
other components are connected. So that usually we call motherboard a
"motherboard".
58) What is
motherboard? What are the different types of it?
Motherboard is the basic integrated board of the computer on which all
other components are connected. This is classified mainly into three Desktop,
Laptop and Server motherboard.
59) What is the
difference between integrated and non-integrated motherboard?
In integrated motherboard all of the external ports will be present. But
in case of non-integrated motherboard only some important ports will be
available instead of all. The non-integrated motherboard is an old type of
motherboard which now a day's not commonly available.
60) How a server
motherboard different from a desktop?
A server motherboard is different from a desktop in features and
performance. The number of processor support, RAM slots ,Expansion card slots
etc...are more. For example the Intel® Server Board S5000PSL has
the performance and features for growing businesses demand. It provides
excellent data protection, and advanced data management. It support 64-bit
Multi-Core Intel® Xeon® processor. Eight fully buffered 533/667 MHz
DIMMs.Up to six SATA 3Gb/s ports.
61) What is form factor
of motherboard?
The form factor of a motherboard determines the
specifications for its general shape and size. It also specifies what type of
case and power supply will be supported, the
placement of mounting holes, and the physical layout and organization of the
board. Form factor is especially important if you build your own computer
systems and need to ensure that you purchase the correct case and components.
62) What is
ATX? How it is different from AT? Which is using now?
AT is a short for advanced technology, the AT is an IBM PC model introduced in 1984. It includes an Intel 80286 microprocessor, a 1.2MB floppy drive, and an 84-key AT keyboard. The ATX form factor specified changes to the
motherboard, along with the case and power supply. Some of the design
specification improvements of the ATX form factor included a single 20-pin
connector for the power supply, a power supply to blow air into the case
instead of out for better air flow, less overlap between the motherboard and
drive bays, and integrated I/O Port connectors soldered directly onto the
motherboard. The ATX form factor was an overall better design for upgrading.
63) What is the need of
expansion slot in motherboard?
Alternatively referred to as an expansion port, an expansion slot is a
slot located inside a computer on the motherboard or riser board that allows additional boards
to be connected to it.
64) What is PCI slot?
How is different from PCI Express (PCI-E)?
Short for PERIPHERAL COMPONENT INTERCONNECT, a local bus standard developed by Intel Corporation. PCI Express (Peripheral Component Interconnect
Express), officially abbreviated as PCIe, is a computer expansion card standard designed to replace
the older PCI, PCI-X, and AGP bus
standards.
65) What is AGP slot?
What is its use?
The Accelerated Graphics Port (often shortened to AGP) is a high-speed
point-to-point channel for attaching a video card to a computer's motherboard, primarily to assist in the
acceleration of 3D computer graphics. Since 2004 AGP has been progressively phased out in favor of PCI Express (PCIe).
66) What is jumper?
What is the need?
A metal bridge that closes an electrical circuit. Typically, a jumper
consists of a plastic plug that fits over a pair of protruding pins. Jumpers are
sometimes used to configure expansion boards. By placing a jumper plug over a
different set of pins, you can change a board's parameters.
67) What CMOS and CMOS
battery?
Short for complementary metal oxide semiconductor. Pronounced see-moss.
The CMOS chip holds the date, time, and system setup parameters. This chip is powered by a 3Volt CMOS battery.
68) What is chipset?
A number of integrated circuits designed to perform one or more
related functions. This is one of the processing device in a computer.
69) Explain any three
Intel chipset?
a) Intel P55 Express Chipset.-Desktop PC platforms based on the Intel® P55
Express Chipset combined with the Intel® Core™ i7-800 series processors and
Intel® Core™ i5-700 series processors create intelligent performance for faster
multi-tasking, digital media creation and gaming.
b) Intel HD55 Express Chipset- a new architecture designed to deliver
quality, performance, and industry-leading I/O technologies on platforms
powered by the Intel® Core™ i7-800, Intel® Core™ i5, and Intel® Core™ i3
processors.
c) Intel E7500 Chipset- a volume chipset supports dual-processor (DP)
server systems optimized for the Intel® Xeon® processor.
70) Which is the
chipset needed for Intel Core i7 and Core i5 processors?
Intel Core i7 900-series uses x58 chip set and Core i7 800-series and
Core i5 processors runs on P55 chipset.
71) Which is the socket
used by Intel Core i7 and i5 processors?
Intel Core i7 900-series uses LGA1366 socket and Core i5 CPUs--all
three run on Intel's latest P55 chipset and LGA1156 socket.
72) What are the
motherboard manufacturing companies?
Intel, Gigabyte, ASUS, Mercury, HP, Acer, Biostar, Compaq, Digital, IBM,
AMI.
73) Before
upgrading/replacing a motherboard what you need to consider?
a) Power Connectors
b) Memory Support
c) Hard Disk Support
d) System Case
74) Can you upgrade
motherboard?
Yes
75) One system is not
starting, but the fan is working. What is the problem?
76) What is Intel LGA
1155 Socket?
LGA 1155, also called Socket H2, is an Intel microprocessor compatible socketwhich supports Intel Sandy Bridge and the up-coming Ivy Bridgemicroprocessors.LGA 1155 is designed as a replacement for the LGA 1156(known as Socket H).
77) What is power
supply unit?
A power supply unit (PSU) supplies direct current (DC) power to the other
components in a computer. It converts general-purpose alternating current
(AC) electric power from the mains to low-voltage (for a desktop computer: 12 V, 5 V,
5VSB, 3V3, −5 V, and −12 V) DC power for the internal components of
the computer.
78) What are the
different types of Form Factors of Power Supply?
AT , ATX, Flex ATX, Micro ATX etc…
79) What is NLX?
NLX (New Low Profile Extended) was a form factor proposed by Intel and developed jointly with IBM, DEC.
80) What is Switching
Mode Power Supply?
A switched-mode power supply (switching-mode power supply, SMPS,
or simply switcher) is an electronic power supply that incorporates a switching
regulator in order to be highly efficient in the conversion of electrical
power. Like other types of power supplies, an SMPS transfer power from a source
like the electrical power grid to a load (e.g., a personal
computer) while converting voltage and current characteristics. An SMPS is
usually employed to efficiently provide a regulated output voltage, typically
at a level different from the input voltage.
81) What is the use of
Molex Power connector?
Molex is a four pin power connector found in SMPS. It is used to supply
power to HDD, CD Drive, DVD Drive etc…
82) What is Berg (mini
Molex) connector is used to….
To provide power to Floppy Disk Drive.
83) What are the
different color cables found in Molex connector? What is the Power of it.
-12V –Blue, -5V –White, 0V –Black, +3.3V –Orange, +5V –Red, +12V
–Yellow.
84) What are the
methods used in a system for cooling?
a) Large System Case
b) Arrangement of Internal Components
c) Keeping the System Clean.
d) Proper Working of the System Case Fan.
85) Power supply fan is
not working and it emits a lot of sound. What will the probable cause?
Most of the time this issue arises due to lots of dust is accumulated on
the fan motor.
86) What is the
capacity of a Floppy Disk?
1.44MB
87) Which is the medium
used in a floppy for storing data?
Magnetic Media.
88) What is write
protected notch in a floppy? What is its use?
This is a switch used to eliminate the accidental deletion of data from
the floppy.
89) How many tracts and
sectors found in a normal floppy dick?
80 tracks and 18 sectors.
90) Which is the file
system of a floppy disk?
FAT
91) How can you format
a floppy? What is happening if you do so?
Insert the floppy to the system and open my computer. There we can find
the icon. Just right click and select format option. Otherwise we can use
format command . Formatting a floppy will creates sectors and tracks on the
floppy.
92) System is not
showing floppy disk drive icon in Mycomputer.What will the probable
cause?
The device is not detected or disabled.
93) I have inserted a
new floppy disk into my drive. The data can be read. But not able to make
modifications. Why?
The disk may be in write protected mode.
94) What is HDD? What
are the different types available in the market now?
A hard disk drive (HDD; also hard drive or hard disk) is
a non-volatile, random access digital magnetic data storage device. It is the secondary storage media. There are different types of hard
disk, based on the the intefaces they used we can classify them as IDE,
SATA, SCSI etc...
95) What is SATA?
Serial ATA (SATA or Serial Advanced Technology Attachment) is
a computer businterface for connecting host bus adapters to mass storage devices such as hard disk drives and optical drives. Serial ATA was designed to replace
the older parallel ATA (PATA) standard (often
called by the old name IDE), offering several advantages over the older interface: reduced cable size
and cost (7 conductors instead of 40), native hot swapping, faster data transfer through higher signalling
rates, and more efficient transfer through an (optional) I/O
queuing protocol.
96) In Speed how SATA
is different from IDE?
SATA- Serial Advanced Technology Attachment (SATA) is high speed serial
interface designed to replace IDE and EIDE drive standard SATA has a seven pin
connector. SATA transfer speed of data up to 600 MB per second. Now a day use
SATA.
IDE- Integrated Drive Electronics (IDE) it has a 40/80 pins connector. IDE transfer speed of data up to 100/133 MB per second few time ago mostly use IDE.
IDE- Integrated Drive Electronics (IDE) it has a 40/80 pins connector. IDE transfer speed of data up to 100/133 MB per second few time ago mostly use IDE.
97) What is eSATA?
External Serial Advanced Technology Attachment or eSATA is an external
interface for SATA technologies. eSATA
cables are narrow and can be up to 6.56 feet (2 meters) in length. eSATA requires its own power connector. It is still an excellent choice for
external disk storage.
98) What is SCSI? Is
the SCSI Hard Disk is needed for a home purpose?
SCSI is Small Computer System Interface , is
a type of interface used for computer components such as hard drives, optical
drives, scanners and tape drives. SCSI is
a faster, more robust technology than IDE amd SATA, and has traditionally been
utilized in servers. Aside from speed, another great advantage over IDE and
SATA is that the SCSI card can connect 15 or more devices in a
daisy chain. The controller assigns each device its own SCSIID, allowing
for great flexibility towards expanding any system. It is more costly. It is
not needed for a home purpose.
99) Is there is USB
HDD? If yes what is the speed?
Yes. If your HDD is based on USB 3.0 it can offer a maximum transmission
speed of up to 5 Gbit/s (640 MB/s), which is over 10 times faster than USB
2.0 (480 Mbit/s, or 60 MB/s).
100) What is IEEE 1394 Interface?
The IEEE 1394 interface is a serial bus interface standard for high-speed communications. The interface is also known by the
brand names of FireWire (Apple), i.LINK (Sony), and Lynx (Texas Instruments). IEEE 1394 replaced parallel SCSI in many applications, because
of lower implementation costs and a simplified, more
adaptable cabling system. The original release of
IEEE 1394-1995 specified what is now known as FireWire 400. It can transfer
data between devices at 100, 200, or 400 Mbit/s. EEE 1394c-2006 was published on June 8, 2007 that provides 800 Mbit/s.
101) What are Solid State Drive means?
A solid-state drive (SSD), sometimes called a solid-state disk or
electronic disk, is a data storage device that uses solid-state memory to store data. SSDs use microchips which retain data in non-volatile memory chips and contain
no moving parts. Compared to electromechanical HDDs,
SSDs are typically less susceptible to physical shock, are silent, have
lower access time and latency, but are more expensive per gigabyte (GB).